| ASE A-4 Suspension and Steering Certification Practice Answers |
|---|
|
Answer A is wrong. Holding the pressure gauge valve closed to long can damage the pump. Answer B is correct. Hold this valve closed for only 5 seconds not 30 seconds. Answer C is wrong. Technician B is correct. Answer D is wrong. Technician B is correct. |
|
Answer A is correct. A slight film of oil on a shock absorbers shaft into the chamber is normal. Answer B is wrong. A drip of oil coming from this chamber is not acceptable. The shock absorber must be replaced. Answer C is wrong. Technician A is correct. Answer D is wrong. Technician A is correct. |
|
Answer A is wrong. Both technicians are correct. Answer B is wrong. Both technicians are correct. Answer C is correct. Also, if a belt wears excessively on one of the edges check pulley alignment. Answer D is wrong. Both technicians are correct. |
|
Answer A is wrong. Both technicians are correct. Answer B is wrong. Both technicians are correct. Answer C is correct. The further the top of the tire is away from the vehicle the more positive the camber. Answer D is wrong. Both technicians are correct. |
25. Answer A is wrong. A worn ball joint is not likely to cause this condition. Answer B is wrong. An worn idler arm is not likely to cause this condition. Answer C is wrong. The worn or mis-adjusted control arm is not likely to cause this condition. Answer D is correct. It is also called a sway bar and is used to control vehicle roll or sway while cornering. |